DAF Form 1024: Confined Space Entry Permit Download

DAF Form 1024: Confined Space Entry Permit Download – Confined spaces pose significant risks in industrial, military, and general workplace settings across the United States. The DAF Form 1024, officially titled Confined Space Entry Permit, serves as a critical safety document used by the Department of the Air Force (DAF) to authorize and control entry into permit-required confined spaces.

This form ensures compliance with OSHA standards and Department of the Air Force safety protocols, helping prevent accidents, injuries, or fatalities during maintenance, inspection, cleaning, or repair work.

What Is a Confined Space?

According to OSHA 29 CFR 1910.146 (Permit-Required Confined Spaces), a confined space meets three criteria:

  • It is large enough for an employee to enter and perform assigned work.
  • It has limited or restricted means of entry or exit.
  • It is not designed for continuous employee occupancy.

A permit-required confined space (PRCS) has one or more additional hazards:

  • Contains or has the potential to contain a hazardous atmosphere (e.g., toxic gases, oxygen deficiency/enrichment, flammable vapors).
  • Contains a material with the potential for engulfing an entrant.
  • Has an internal configuration that could trap or asphyxiate an entrant (e.g., converging walls or downward-sloping floors).
  • Contains any other recognized serious safety or health hazard.

Common examples in military or industrial environments include storage tanks, boilers, silos, utility vaults, manholes, pipelines, and aircraft fuel cells.

Why Is DAF Form 1024 Required?

The DAF Form 1024 documents that all necessary hazard controls, atmospheric testing, rescue planning, and authorizations are in place before entry. It implements requirements from DAFMAN 91-203 (Air Force Occupational Safety, Fire, and Health Standards), Chapter 23 on Confined Spaces, which aligns with OSHA 1910.146.

Key purposes:

  • Authorize safe entry for a specific time period (typically one shift, maximum 8 hours).
  • Record pre-entry preparations, including isolation of hazards (lockout/tagout), ventilation, and atmospheric monitoring.
  • Assign roles: Entry Supervisor, Authorized Entrants, and Attendant(s).
  • Provide a clear record for post-entry review and annual program audits.

Note: For routine entries, a Master Entry Plan (MEP) may cover recurring work, with individual DAF Form 1024 permits issued by the Entry Supervisor. Occasional or non-routine entries often require additional approvals from the Confined Space Program Team (CSPT), which includes safety, bio-environmental, and fire protection personnel.

Key Sections of the DAF Form 1024

The form captures essential details in a structured format. While exact field layouts appear in the official PDF, typical sections (based on Air Force guidance and standard permit practices) include:

  1. General Information — Location and description of the confined space, purpose of entry, operation covered by Technical Order (T.O.) or Operating Instruction (O.I.), date, and authorized duration of the permit.
  2. Hazards Identification — Atmospheric hazards (oxygen levels, flammable gases, toxic substances), physical hazards (engulfment, entrapment, mechanical), and other recognized hazards.
  3. Required Equipment and Controls — PPE (personal protective equipment), ventilation methods, communication equipment, lighting, barriers, and isolation procedures (e.g., lockout/tagout).
  4. Rescue Services — Designation of rescue team (on-site or off-site), equipment availability, and non-entry vs. entry rescue methods.
  5. Personnel — Names and signatures/roles of Entry Supervisor, Authorized Entrants, and Attendant(s).
  6. Atmospheric Testing Records — Pre-entry and periodic test results for oxygen (19.5–23.5%), flammable gases (<10% LEL), and toxic contaminants (below PELs/TLVs). Tester initials and timestamps are required.
  7. Authorization and Close-Out — Entry Supervisor signature authorizing entry, conditions for termination, and post-entry cancellation/initials confirming all personnel accounted for and the space secured.

The permit must be posted at or near the entry point during operations and retained for at least one year for program review.

How to Complete and Use DAF Form 1024? (Step-by-Step)

  1. Evaluate the Space — The Confined Space Program Team or competent person classifies the space and develops hazard controls.
  2. Prepare the Space — Isolate energy sources, ventilate, clean if needed, and test the atmosphere.
  3. Fill Out the Form — The Entry Supervisor completes all sections, verifying acceptable entry conditions.
  4. Obtain Authorization — Entry Supervisor signs only after confirming all preparations.
  5. Perform Entry — Attendant monitors continuously; entrants follow procedures. Immediate evacuation if conditions change.
  6. Terminate and Review — Account for all personnel, cancel the permit, and file documentation.

Important: Permits are generally valid for one shift only. New permits are required if conditions change or after 8 hours.

For detailed instructions on completing each field, refer to DAFMAN 91-203, paragraph 23.11.

Download the Official DAF Form 1024

You can download the current DAF Form 1024 Confined Space Entry Permit directly from the official Air Force e-Publishing site:

→ Download DAF Form 1024 PDF

This is the authoritative version for Department of the Air Force use.

OSHA and DAF Compliance Tips for 2026

  • Employers must maintain a written permit space program.
  • Training is required for all Entrants, Attendants, Entry Supervisors, and Rescue teams.
  • Atmospheric testing must use calibrated, direct-reading instruments.
  • Rescue services must be available and capable of prompt response (practice drills recommended).
  • Contractors must coordinate with host employers and follow equivalent safety measures.

Non-compliance can result in serious injuries, OSHA citations, or operational delays.

Best Practices for Confined Space Safety

  • Use continuous monitoring when possible.
  • Never rely solely on “smell” or assumptions for air quality.
  • Prioritize non-entry rescue methods (tripods, harnesses, retrieval lines).
  • Conduct annual program reviews using canceled permits.
  • Integrate digital tools where allowed for tracking, but ensure the physical or printed permit meets documentation standards.

Who Needs This Form?

  • U.S. Air Force and Department of the Air Force personnel and contractors.
  • Safety professionals, maintenance teams, and industrial hygienists working on or near DAF installations.
  • Any organization seeking a model compliant permit system aligned with military standards.

Bottom Line: The DAF Form 1024 is more than paperwork — it is a lifesaving tool that enforces disciplined hazard control in high-risk environments.

For the most current guidance, always consult the latest edition of DAFMAN 91-203 (updated as of 2026) and OSHA 1910.146. If you manage confined space programs, ensure your team is trained and your permits are properly executed every time.

Need the form or further assistance? Download it from the link above and consult your local safety office or CSPT for site-specific implementation.

This article is for informational purposes and does not replace official training or regulatory requirements. Safety protocols can evolve; verify with current DAF and OSHA sources.